Best Trailer Jacks | etrailer.com (2025)

by: Shane 11/29/2023

Super fast shipping thanks

by: Jordan 04/03/2024

I bought this Jack for a custom built enclosed tool trailer. Fully loaded it doesn’t have any issues lifting. Great Jack and I’ve had it about a year now

by: Joseph11/10/2020

After the gears on my original/stock A-frame sidewind jack had stripped and failed (BAL 2000 mounted on my 2017 Forest River Rockwood mini-lite model 2306 with a dry weight of 4005 lbs), I replaced it with another BAL 2000 sidewind model which lasted less than 6 months before the gears also had stripped and failed. After reviewing numerous A-frame jack sidewind models, I decided to purchase the Bulldog A-frame sidewind model with a rating of 5000 lbs and a 15" lift. I also purchased the corresponding foot pad to help with the distribution of weight. The installation was straightforward and simple and so far, I have not experienced any functional issues with the jack. For anyone searching for and in need of a high quality and capable A-frame sidewind trailer jack, I would highly recommend this particular model.

by: Chalmers 08/16/2024

Fast shipping, accurate description of the product. Easily installed. Definitely would buy from etrailer.com again.

by: keyslammer05/09/2023

Mine arrived with a drill bit end broken into the release handle. In fact, the drill bit was what was holding it together. I don't know what a production unit has in that through hole (a roll pin?). Regardless, it isn't something you want to find in a new jack. After I punched it out, I added a snap ring pin to hold it in place. One other comment would be that the foot needs to be unbolted in order to remove the jack. Ideally a locking pin would have been better than the bolt for a "no-tools-needed" removal.

by: William08/18/2023

I purchased this for my off road camper, because I wanted a jack that completely retracts and doesn't leave anything hanging beneath the frame that could hang up on rocks, etc. This is just the ticket. Once hitched up, it's easy to remove the foot (or nose wheel if you prefer), and lift the jack up to its highest setting. Seems to be really well made. It's quite heavy, but offers an incredible range of height adjustment.

by: Dave Harris06/27/2012

If etrailer didn't have such a detailed website, I may have shopped somewhere else. But it was because they have a section where you can ask questions and get detailed answers that I decided to buy the Pro Series jack above. My ATV trailer jack is 2-1/4 " square at the top and welded to the frame. The large nut inside that moves the jack up and down had stripped. Couldn't find another nut anywhere - not locally or on the internet, nor would a machine shop make one for less than $200! Only options were to cut the old jack free and weld on a new one - or - scab parts from a new one and hope they would fit. I took a chance on the latter. Michael Howell really went out of his way to disassemble another of these jacks and measure the o.d. of the main screw inside for me. It was exactly what I needed! The jack came on time and was immediately placed on the operating table. Had a devil of a time punching the pin from the side gear, but after that, and a little grinding on the screw top, I fitted the lower half of the new jack to the gears and handle of the old one. Chock another one up for good old American inginuity and elbow grease! $77 and 2 hours later I had a brand new bouncing baby jack. No cutting, No welding, No Problem!! Pictures of finished jack included. Thanks guys! This saved me well over $100, and now I can go 4-wheeling again!

by: Jim W01/27/2015

Ordered two on Thursday at 7:30 pm and they arrived Monday before noon to central MN. The box was a little beat up but neither were damaged. Very well built product and very smooth cranking. Mounted on the back corners of a 3000 lb. fishhouse that was a travel trailer. We had to replace the bumper as it rusted out and the existing jacks only had a 7" lift with no drop leg. Now we won't have to jack and block, jack and block. The free shipping was the deal maker as they weigh 22 lb.s each. I would recommend this product.

by: Robert R12/10/2013

Easy install to provide greatly improved unhitched trailer handling. This item was the final component to complete a refurbished trailer for my catamaran. My project started with a 1987 Calkins single-axle used trailer, adding the following E Trailer parts: 1. Miro-Flex Trailer Stop/Turn/Tail Light unit2. CE Smith V-Wing Bolster Brackets3. Rectangular Trailer Reflectors, Adhesive Mount - Amber4. Erickson Hide-A-Hook Truck or Trailer Anchors5. Pro Series Snap-Ring Swivel Marine Jack and completed with a hand-built frame assembly and covered bunk boards.

by: Michael01/29/2021

The trailer jack was the perfect addition to my little utility trailer. Makes moving it around a lot easier now. The swivel feature works well and tucks the wheel and jack up out of the way when not in use.The upgrade to the trailer included the trailer jack, spare tire holder, fenders/brackets, 12" wheels/tires and a spare. I also purchased an anti rattle hitch stabilizer to help quiet down the noise. New longer safety chains are on order and are the last item needed to complete the upgrade.

by: Paulette03/09/2018

My horse trailer is 20 years old and I thought that overnight I'd aged 40 years when I could no longer crank the jack up or down! I looked on line after a 20 something friend suggested that the jack needed to be replaced. He helped me crank the old one down and thought that he'd hurt his back. I ordered this Bulldog Square Jack on a Sunday afternoon. It was delivered to my trailer guy on Wednesday about noon. My guy swapped out my old jack for this one in about 2.5 hours. When I picked up my trailer, I tried the new jack and realized that once again, I was 64 years young!! It operates smooth as silk!!

by: Troy L11/12/2024

It shipped very quickly...which was important as the worn-out jack on my gooseneck livestock trailer locked up and I couldn't unhook it from the dually.

by: Dawn 08/02/2024

My horse trailer jack was getting super hard to crank, I tried greasing it, but it didn't help much This jack arrived quickly, was was easy to install, and now, for about a hundred bucks, I can raise my trailer off my hitch with one hand.

by: paul 11/15/2024

Very solid jack with good gearing, a great replacement for the stock jack that was on my trailer.

by: Richard A.07/10/2012

Purchased to stabilize my recently obtained trailer for hauling my tractor. The jacks add a great deal of security and safety to the operation by allowing me to block the downward movement of the rear of the trailer while driving the tractor onto it, then being able to remove them once loaded for transport.

by: Ricky 09/11/2024

Package arrived a day early. Jacks were just as I expected and best price I found. Can’t wait to get them welded on. Will be buying more jacks in the future. Best selection I’ve found as well.

by: Isaac 11/12/2023

Existing job site trailer jack broke Thursday. Menards, Home Depot, Northern tool, Mill didn't have the needed style in stock. Ordered it up and got here on Saturday. Perfect fit and higher weight rating than previous jack. Cranks smooth.

by: Ryan S.05/22/2024

Item arrived one day after expected date, but that was due to UPS. etrailer has it processed and out to UPS same day I ordered it, which was a Sunday too. Item arrived great. Was exactly what was described. I could not find this same jack at other stores. etrailer had exactly what I needed and it was cheaper, with a higher rating too. Will order from etrailer again.

by: Bret06/27/2024

Great! Bought a 7000lbs capacity trailer that did not come with a jack, the info on this website makes it easy to find one to match your needs, and do it quickly. Very satisfied with this transaction, will use again!

by: Wayne 07/02/2024

Good product and very fast shipping which was needed as my current jack had broken and I couldn't raise the trailer

by: Hank06/13/2024

Mounted on the bottom of the new trailer jack i bought from etrailer. Everything works as advertised. Fair price and great customer service

by: 06/19/2024

The jack I have purchased came without a handle. Nothing in the description says that it doesn’t come with a handle. I call customer service and the automated voice says 5-7 minute wait time, turns into a 30min+ wait time. Then I hang up. I just want to get the handle for the trailer jack I purchased.

by: Chuck04/10/2017

I needed a swing jack for my 25' boat trailer, to move it around without hitching to my truck. As you can see, by the pictures, I bolted on a 10" lawn / garden swivel caster to the foot of your jack. This way I can drop the jack down and raise the original jack up (which has a too small wheel that sinks into my soft yard). In this way I use my lawn tractor to move the boat around my yard. Hitched to my truck and the rig is to long to maneuver.

by: Keith08/21/2024

The product, a trailer jack,is very good.The delivery by UPS was terrible. They left my package out by the road leaning against the mailbox.They always bring things up to the house and put it on the porch.Its a miracle it wasn't stolen.I reported it to etrailer and I will report it to UPS.

by: Joe 10/13/2024

After a year being stored outside on the trailer, it is working just fine

by: Larry Feggett08/15/2016

The trailer part was delivered on time and the unit was the right item, the first time.

by: Mark10/05/2023

Jack works great. Damaged the original when I forgot to lift the foot and hit my concrete parking apron. After I straighten out the mount this jack fit the hole perfectly and works great.

by: David10/18/2022

Wish I would have upgraded sooner, is the first thing that comes to mind. The original equipment jack should be against the law of building trailers. I've never owned a trailer from a company that installs a jack long enough to reach the ground and lift the trailer off the ball, without having to use a block of some sort. This solves that issue! The drop leg alone gets you within an inch or two of where you'll start winding the jack to lift it off the ball. The side handle location is better in my opinion, and this has a grease fitting for maintenance. When installing, I had to turn the round hole into a square hole using my angle grinder with a cutoff wheel, maybe took 20 minutes to lay out the cut lines, make the cuts, and finish up with a file to smooth the edges. You will have to re-locate the 2 rear holes of the jack when mounting as they don't line up with the original ones. This is no big deal though, and even though the metal I was drilling through was pretty thick, if you'll put a few drops of oil in the spot you're drilling and then re-apply once or twice while drilling, this part will go quickly and easily and you won't burn your drill bit up. Don't forget the original equipment bolts are threaded, so you'll need some bolts, washers and nuts once you drill the 2 rear holes, unless you have the tools to thread them. I hope those few humble suggestions help anyone considering buying this. I couldn't be happier, and I"ll be buying another for my smaller trailer, even though this is rated for way more than it can haul. Worth every penny, don't hesitate to buy.

by: Ryan12/23/2013

Product arrived very promptly as I was upgraded to expedited status. Product was exactly as described, packaged well, and met my expectations. Product description and pictures on the website were very accurate and helped me choose the correct trailer jack for my application. etrailer.com is a pleasure to do business with.

by: Luke07/24/2020

Very sturdy construction. My light duty round jack failed in my camper and needed to be replaced. I always wanted a drip leg instead of using blocks. I had t cutout a square hole but well worth the extra effort to have a heavy duty jack with a drop leg. Thanks again to etrailer for excellent pricing and fast free shipping.

by: Rick05/11/2013

The perfect jack for low clearance trailers! I had trouble finding a jack for my bumper pull horse trailer that wouldn't drag the ground pulling into gas stations, parking lots, etc. I looked at all the farm and home stores in my area with no luck. I thought maybe it didn't exist...then I found etrailer. The short extension below the mount on this jack was exactly what I needed! When fully retracted, it extends no lower than the hitch. I gained five inches from the previous jack. Great peace of mind when traveling and much less worry about dragging when I need all the clearance I can get! Thanks etrailer...and the video was excellent in helping me make sure I was getting what I wanted!

by: Chuck07/02/2018

Nice addition to my trailer. I spent a lot of time looking for a jack with a short "hang down " distance from the frame to the ground. This one is perfect. The trailer rides low and will bottom out without a short "hang down".

by: MIKE 09/26/2024

I received Reese jacks instead of the PRO SERIES JACK as pictured.

by: SRich10/06/2020

Very heavy. Replaced an OEM with a wheel. I much prefer the foot to the wheel. Install was ok. I simply used the existing mount and the original snap ring. The snap ring shipped with the mount was a little thicker and I couldnt get it to work. I saved the weld on mount for another trailer I'm building.

by: Robert09/18/2024

Purchase in July 2024 2nd trip out the black roller grip on the jack handle was missing. I figured simple deal, call letSomeone know they’d send me a new the part and retainer and I’d carry on. Nope etrailer wants whole jack back? ( threw old one away so how does that work?) so reached out to Fulton and spoke with tech service they promised the part to be shipped but has never arrived? Keep trying them back and end up on hold forever until I give up. Emails are not returned. There is no customer service anymore.

by: Paul 08/26/2023

I have not had my jack installed yet. I thought I might be able to use the existing mounting bracket from my Shelby 5784 jack but it looks like I need to have the old one replaced and have the new mounting bracket welded onto my trailer. Once I get the new one installed, it appears that this will be a great jack.

by: Craig G.08/03/2014

This is a great jack. My previous jack(rated to 1200lbs.) was bent after raising the back end of the boat trailer to replace broken leaf springs and that's why I ordered a heavier duty jack. I really like the piece that keeps the crank from rotating while trailering and the dual wheels make it much easier to push/reposition the boat while it's being stored inside. The previous jack was a weld on mount so the installation was more involved. I didn't go with another weld on jack because none of the available weld on type jacks matched the hole positions on the existing weld on plate and I didn't want to deal with getting a welder to install/weld a new plate to the trailer frame. I ground off the plate from the trailer frame and smoothed the surface where the weld beads were. The u bolts that came with the new jack were too small to fit around the trailer frame so I drilled holes through the frame and was able to easily mount the jack with the u bolts provided. The jack works like a charm and looks great too. It was an excellent choice.

by: Steve B01/04/2017

The trailer jack f2 arrived in perfect shape at a very competitive price. The quality of the product was surpassed only by the fabulous customer service. I teach sales training and customer training and I have a new example of excellent customer service to present to my classes. More purchases to follow. The jack is installed on an all aluminum diamond plate show trailer for my Canam Spyder F3 trailer. The style of the all aluminum jack compliments the trailer.

by: Gary12/20/2018

These are sweet jacks. I installed a pair on the rear of my 20ft bumper pull equipment trailer. These things will lift the entire trailer off the ground. Comes in handy changing flats. The reason I installed them was to stop the bobcat from lifting my truck off the ground when loading. Got tired of carrying 6x6 blocks to put under the rear of the trailer. I really like the swing feature. When stowed I crank them against the tail light bracket to keep them quiet.

by: Mark 09/26/2024

Great service, fast shipping, friendly employees! I appreciate the communication and the quick delivery. Will be buying from etrailer for all my trailer needs.